Preparations
SQT1120 (ENG)
14
Charging the battery
The battery that can be used with this unit is DMW-BLC12E or DMW-BLC12.
The battery is not charged when the camera is shipped. Charge the battery before use.
•
Use the dedicated charger and battery.
1
Attach the battery paying attention to the direction of
the battery
2
Connect the charger to the electrical outlet
Charging light ([CHARGE])
On:
Charging in progress
Off:
Charging complete
If light is flashing:
• Battery temperature is too high or too low.
We recommend charging in a location where
the ambient temperature is between 10 °C
and 30 °C.
• Battery/charger connector is dirty. Clean with
a dry cloth.
• The AC cable does not
fit entirely into the AC
input terminal.
A gap will remain.
• Charge the battery with the charger indoors.
3
Detach the battery after charging is completed
■
Notes on charging time
Charging time
Approx. 140 min
• The charging time indicated above is the time required for charging in case when the
battery is completely used up. The time required for charging differs depending on
conditions of battery usage. Charging takes longer in cases when temperatures are
either high or low and when the battery has not been used for a long period of time.