
Preparation
20
ª
Temporarily storing the lens hood
You can store the lens hood in the camera
temporarily. Please do not take a picture with
the lens hood stored.
[Preparation]
• Check that the power switch is set to [OFF]
and the lens barrel is stored.
• Close the flash. (P36)
1
Remove the lens hood.
2
Reverse the lens hood and attach it.
• Attach the lens hood adjusting the
mark
±
of the lens hood adaptor to the
mark of the lens hood, and rotate the
lens hood to the right.
3
Attach the lens cap.
• It is recommended that the lens hood be
removed when using the flash. Vignetting
can occur, causing the lower portion of the
photo to be dark.
• The lens cap can be installed while the lens
hood is in use if the lens cap string is not
used.
1
2
3
KC72‑PP.book 20 ページ 2002年12月12日 木曜日 午後7時38分
Содержание DMC-FZ1PP
Страница 107: ...107 Memo KC72 PP book 107...