Panasonic DMC-FZ15K Скачать руководство пользователя страница 16

Страница: 16 / 124

Preparation

Inserting/Removing the Card

• Check that the camera is turned off and

that the lens is retracted.

• Close the flash.

Slide the card/battery door to
open it.

• The card and the data may be

damaged if it is inserted or removed
while the camera is on.

• We recommend using Panasonic’s SD

Memory Card. (Use only the genuine
SD card with SD Logo.)

Insert:
Insert the card with the label
facing the front of the camera
until it clicks.

Remove:
Push the card until it clicks, then
pull the card out upright.

• Check the direction of the card.
• Do not touch the connection terminals

on the back side of the card.

• The card may be damaged if it is not

fully inserted.

Close the card/battery door.

Slide the card/battery door to
the end and then close it firmly.

• If the card/battery door cannot be

completely closed, remove the card and
insert it again.

FZ15-PP.book 16 ページ２００４年７月２０日　火曜日　午後９時２７分

Содержание DMC-FZ15K





























































































































Результаты поиска

Содержание DMC-FZ15K

Отзывы:

Похожие инструкции для DMC-FZ15K

Бренды по названию

Популярные бренды

Panasonic DMC-FZ15K, Руководство по эксплуатации

Результаты поиска

Содержание DMC-FZ15K

Отзывы:

Похожие инструкции для DMC-FZ15K

Бренды по названию

Популярные бренды