- 47 -
Basic
•
This will work when the
HDMI
micro
cable (optional)
is connected.
•
Refer to
P148
for the method to playback 3D pictures in 3D.
•
Refer to
P30
for information about how to play back pictures.
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by “JEITA (Japan Electronics and
Information Technology Industries Association)”.
•
It may not be possible to rotate pictures that have been recorded with other equipment.
•
The display is not rotated during Multi Playback.
•
Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not
turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If the card cannot be formatted, please try another card before contacting your nearest Service
Center.
[3D Playback]
Setup the output method for 3D pictures.
[
] ([3D]):
Set when connecting to a 3D compatible television.
[
] ([2D]):
Set when connecting to a television not compatible with 3D.
Set this when you would like to view pictures in 2D (conventional
image) on a 3D compatible television.
[Rotate Disp.]
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically.
[
] ([On]):
It will rotate and display vertically.
[
] ([External Only]):
It will display vertically only when playing back connected to a TV.
[
] ([Off]):
[Version Disp.]
It is possible to check which version of firmware is on the camera.
[Format]
The built-in memory or card is formatted (Pictures in My Photo
Album are also formatted). Formatting irretrievably deletes all the
data so check the data carefully before formatting.
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: [email protected]
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo