- 47 -
Basic
Note
•
The indicated zoom magnification is an approximation.
•
“EZ” is an abbreviation of “Extended Optical Zoom”.
•
The Optical Zoom is set to Wide (1
k
) when the camera is turned on.
•
If you use the Zoom function after focusing on the subject, focus on the subject again.
•
The lens barrel extends or retracts according to the zoom position. Take care not to interrupt
the motion of the lens barrel while the zoom lever is rotated.
•
When using the Digital Zoom, [STABILIZER] may not be effective.
•
When using the Digital Zoom, we recommend using a tripod and the self-timer
(P63)
for taking
pictures.
•
[I.RESOLUTION] is fixed to [i.ZOOM] in Intelligent Auto Mode (when [MOTION DEBLUR] is set
to [OFF]), or Scene Mode
¢
.
¢
[i.ZOOM] cannot be used when in [HANDHELD NIGHT SHOT], [HIGH SENS.],
[FLASH BURST] or [PIN HOLE] in Scene Mode.
•
The Extended Optical Zoom cannot be used in the following cases.
–
In [MOTION DEBLUR] in Intelligent Auto Mode
–
In Macro Zoom Mode
–
In [TRANSFORM], [HIGH SENS.], [FLASH BURST], [PIN HOLE] or [PHOTO FRAME] in
Scene Mode
–
When recording motion pictures
•
[DIGITAL ZOOM] cannot be used in the following cases.
–
In [TRANSFORM], [HANDHELD NIGHT SHOT], [HIGH SENS.], [FLASH BURST],
[PIN HOLE], [FILM GRAIN] or [PHOTO FRAME] in Scene Mode
–
In Intelligent Auto Mode
Zooming with touch operation
Touch [
].
•
Zoom lever is displayed on the LCD monitor.
Touch the Tele or Wide side of the zoom
lever on the screen.
•
Zoom position will automatically move to Tele when
[
] is touched, and to Wide when [
] is touched.
Zooming will stop where it is if you touch again while
zooming.
•
Zoom lever will disappear when no operation is
performed for approximately 5 seconds.