Panasonic DMC FS7P - Lumix Digital Camera, Руководство по обслуживанию

Страница: 36 / 50

S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Flash Top P.C.B. .................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Flash Top Schematic Diagram .............................................. S-5
S4.3. Lens Flex Schematic Diagram .............................................. S-6
S5. Print Circuit Board .................................................................... S-7
S5.1. Flash Top P.C.B. .................................................................... S-7
S5.2. Lens Flex P.C.B. .................................................................... S-8
S6. Replacement Parts List ............................................................ S-9
S7. Exploded View ....................................................................... S-13
S7.1. Frame and Casing Section.................................................. S-13
S7.2. Packing Parts and Accessories Section (1) ........................ S-14
S7.3. Packing Parts and Accessories Section (2) ........................ S-15
Table of contents
Service Manual
DSC0902005CE
Diagrams and Replacement
Parts List
Vol. 1
(S)...........Silver Type (except PC/EF/GD/GT)
Colour
(K)...........Black Type (except GJ/GT)
(P)...........Pink Type (except GK)
(G)...........Green Type (except PR/EB/GC/GD/GJ/GK/GN)
(A)...........Blue Type (except PR/EB/GD/GJ/GN/GT)
Model No.
DMC-FS7P
DMC-FS7PC
DMC-FS7PR
DMC-FS7PU
DMC-FS7EB
DMC-FS7EE
DMC-FS7EF
DMC-FS7EG
DMC-FS7EP
DMC-FS7GC
DMC-FS7GD
DMC-FS7GJ
DMC-FS7GK
DMC-FS7GN
DMC-FS7GT
Digital Camera
Name of Signal
OFTR FEP
This signal is connected
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice