Panasonic DMC-CM1, Руководство по эксплуатации, Страница: 186 / 194

20. Others
186
∫ Recording
The picture cannot be recorded.
≥
Is there any memory remaining on the built-in memory or the microSD card?
> Delete the pictures which are not necessary to increase available space in the memory. (P126)
≥
You may not be able to record for a short while after turning this unit on when using a large capacity microSD card.
The recorded picture is whitish.
≥
Picture might look whitish when lens gets dirty with fingerprints or similar.
> If the lens is dirty, lightly wipe the surface with a soft, dry cloth.
The recorded picture is too bright or dark.
≥
Check that the exposure is correctly compensated. (P86)
≥
Is the AE Lock (P117 , 121) applied incorrectly?
Multiple pictures are taken at one time.
≥
Cancel the following settings:
– [Burst]/[Auto Bracket]
(P96)
The subject is not focused properly.
≥
The subject is beyond the focus range of the unit.
≥
There is camera shake (jitter) or the subject is moving slightly.
≥
Is the AF Lock (P117 , 121) applied incorrectly?
The recorded picture is blurred.
≥
The shutter speed becomes slower when pictures are taken in dark places so hold the unit firmly with both hands to
take the pictures.
(P40)
≥
When taking pictures at a slow shutter speed, use the Self-timer. (P100)
The recorded picture looks rough.
Noise appears on the picture.
≥
Try the following:
> Take pictures in bright places.
> Decrease the ISO sensitivity. (P87)
> Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of the items other than
[Noise Reduction].
(P102)
> Is the [Picture Size]
(P104)
or the [Quality]
(P105)
set low?
Striping or flicker may appear under lighting such as fluorescent lighting and LED lighting fixture.
≥
This is characteristic of MOS sensors which serve as the unit’s pickup sensors.
This is not a malfunction.
> Lowering the shutter speed may reduce the effect of the horizontal stripes.