Panasonic DLP PT-DW530E страница 11 Скачать руководство пользователя

Страница: 11 / 96

Precautions with regard to safety

ENGLISH -

Important

Information

Do not allow children to reach the AA/R6/LR6 batteries.

The battery can cause personal injury if swallowed.

If swallowed, seek medical advice immediately.

If the battery fluid leaks, do not touch it with bare hands, and take the following measures if

necessary.

Battery fluid on your skin or clothing could result in skin inflammation or injury.

Rinse with clean water and seek medical advice immediately.

Battery fluid coming in contact with your eyes could result in loss of sight.

In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.

Do not disassemble the lamp unit.

If the lamp breaks, it could cause injury.

Lamp replacement

The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will result.

Replacement of the lamp should be carried out by a qualified technician.

The lamp can easily explode if struck against hard objects or dropped.

Before replacing the lamp, be sure to disconnect the power plug from the wall outlet.

Electric shocks or explosions can result if this is not done.

When replacing the lamp, allow it to cool for at least one hour before handling it otherwise it can cause burns.

Do not allow infants or pets to touch the remote control unit.

Keep the remote control unit out of the reach of infants and pets after using it.

Keep the attached screws and plain washers away from babies and infants.

If a baby swallows a screw by accident, it may be affected badly.

If a baby seems to have swallowed a screw, consult the doctor immediately.

Содержание DLP PT-DW530E

































































































Результаты поиска

Содержание DLP PT-DW530E

Отзывы:

Похожие инструкции для DLP PT-DW530E

Бренды по названию

Популярные бренды

Panasonic DLP PT-DW530E, Руководство по эксплуатации

Результаты поиска

Содержание DLP PT-DW530E

Отзывы:

Похожие инструкции для DLP PT-DW530E

Бренды по названию

Популярные бренды