manualshive.com logo in svg

Panasonic Digital Palmcorder MultiCam PV-DV203-K, Руководство по эксплуатации

Поделиться
Скачать
Panasonic Digital Palmcorder MultiCam PV-DV203-K Скачать руководство пользователя страница 9

9

Bef

ore Use

Before Using

1

Press LIGHT

. (Mode      )

• LED Light and GAIN UP turn ON.
• GAIN UP ON will be brighter than

when only LED Light is ON, however,
ghost images will appear.

2

Press LIGHT

. (Mode      )

• GAIN UP turns OFF.
• To eliminate ghost images, use this

mode.

3

Press LIGHT

. (Mode      )

• LED Light turns OFF.
• Pressing LIGHT again returns to       .

To brighten the natural colours in a scene.
GAIN UP works together with the LED Light
to enhance the light’s brightness.

Using Built-in 

 

LED Light

• Using Light reduces battery time.
• Set LIGHT to OFF when not in use.
• Do not look directly into the light.
• If the LED Light is used with a Conversion

Lens attached, a slight vignetting
(darkening around edges) effect occurs
on the screen.

• Using MagicPix at the same time will

make conditions even brighter. (p. 42)

Built-in LED
Light

Note

Before you begin

• Connect the Palmcorder to a power

source. (pp. 16, 17)

• Set POWER to CAMERA or M-CARD.

1, 2, 3

LIGHT

Press LIGHT

Press
LIGHT

LED Light OFF
GAIN UP OFF

2

LED Light ON
GAIN UP ON

3

LED Light ON
GAIN UP OFF

Press LIGHT

• Use LED Light for recording subjects

1.5 m (4.9 feet) away or closer.

• In the M-CARD mode, the GAIN UP mode

cannot be set.

Note

1

1

2

3

1

DV203-K.p  9-12.p65

2003/06/11, 13:29

9

Содержание Digital Palmcorder MultiCam PV-DV203-K





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды