82
VQT2J52
Troubleshooting guide
On-screen display indicators do not appear.
¾
Select a setting other than “Off” in “On-Screen Messages” in the
Setup Menu. (
>
65)
– Press [STATUS ] to show the on-screen display indicators.
– The on-screen indicator for video cassette playback will not
be displayed when this unit is connected to the TV with the
DVD priority out terminals.
The grey background appears during playback.
¾
You are playing a blank or poor quality portion of the tape.
¾
You can damage the unit if you play dirty or damaged tapes and
this can cause the grey background to appear.
Cannot hear the desired audio type.
¾
Press [AUDIO] to select the audio. (
>
37)
There is noise when playing a video tape.
¾
Adjust the tracking. (
>
37)
¾
The tape is old or damaged.
The playback screen flickers.
¾
The video head is dirty. (
>
5)
¾
The tape is old or damaged.
¾
Check the “SQPB” setting. (
>
67)
“
1
” flashes when I try to start recording.
Cannot record.
¾
A video cassette is not inserted. Insert a video cassette with an
accidental erasure prevention tab. (
>
5)
¾
The accidental erasure prevention tab has been removed.
Cover the hole with adhesive tape. (
>
5)
The contents of the USB memory cannot be read.
¾
Remove the USB memory from the USB port and then insert
again. If this does not solve the problem, turn off and turn on the
unit again.
¾
Check that the USB memory is inserted correctly. (
>
15)
¾
The format of the USB memory or of its contents is not
compatible with the unit. (The contents on the USB memory
may be damaged.) (
>
13, 14)
¾
The USB memory contains a folder structure and/or file
extensions that are not compatible with this unit. (
>
14)
¾
Turn off and then turn on the unit again.
¾
USB memories connected using a USB extension cable or a
USB hub may not be recognized by this unit.
¾
Some USB memories cannot be used with this unit. (
>
13)
¾
If inserted during playback, recording or copying etc., the USB
memory may not be recognized by this unit.
The TV Guide System does not receive any data.
¾
Check whether TV Guide system setup was performed in full.
¾
Check whether the clock is properly set. (
>
67)
¾
If signal quality is bad (ghost images or limited reception), the
TV Guide system may not be able to receive any data.
¾
In the area where GUIDE Plus+ system is available, check
whether correct post code is entered. (
>
68)
“No Data” is displayed for some or all stations.
¾
Some stations are not supported by the TV Guide system.
¾
Analogue broadcasts are not supported by the TV Guide
system.
¾
Programme the Timer recording manually or via S
HOW
V
IEW
(
[For]Germany[and]Austria[
). (
>
30)
The TV Guide information is not displayed
properly.
¾
There was a programme change.
Check the current programme, e.g. on the Web site for the TV
Guide system provider or station provider.
¾
Programme information about analogue broadcasts is not
displayed.
The TV Guide data transfer was interrupted.
¾
The TV Guide system shows the data that was received up to
the interruption.
¾
The programme information may be incomplete.
The TV Guide data is not updated.
¾
The unit must be in standby mode in order to update the data. If
the unit is in EXT LINK mode (EXT-L lights up in the display),
then the data update may also not work.
¾
Make sure that the time is set correctly.
¾
Make sure that “TV Guide Download in Standby” is set to “On”.
(
>
68)
VHS
USB
TV Guide
DMR-EZ49VEGEC-VQT2J52_eng.book 82 ページ ２０１０年１月７日 木曜日 午後４時０分
