Panasonic DIAGNOSTEC EW-BU55, Руководство по эксплуатации, Страница: 11 / 68

HOW TO USE
English
10
1.
Press .
After the entire display has been lit, the cuff
will be pressurized and measurement will be
taken automatically.
The pressure value and the time will be ●
displayed.
The
●
mark will flash when pulse is
detected during pressurization.
After the measurement is completed, the
blood pressure value and pulse rate will be
displayed.
"
●
" and the graph " " are blinking.
For how to see the graph, refer to page 16.
According to the measurement result,
●
safety/warning marks may be displayed.
For details, refer to page 11, 12.
Taking a reading (Measuring/Recording measurements)
BU55 can store measurement values for two people (270 measurements per person).
●
BU35 can store one person's measurements (270 measurements).
●
When exceeding 270 stored measurements, stored data will be overwritten, ●
beginning with the oldest data.
Finish
Start
2.
To store the measured values.
(1) Press to select the desired user. (BU55)
(2) press .
"
●
" will go from flashing to being
steadily lit.
The memory number, measurement date,
●
and time are alternately displayed.
If you do not press
● , the unit
will shut down automatically after approx.
5 minutes.
3.
To complete the measurement, press
.
Memory
Please start taking a reading under the condition that the power is off.
(BU55)
BU55_35.indb 10 2011/05/24 19:12:48