14
Insert the Card
Be sure to turn the power off when you insert the card.
1
Slide the door while releasing the
lock.
1
Open the door.
2
2
Insert the card all the way in until it
clicks.
• Check the direction of the card.
• Do not touch the connecting terminal
on the rear of the card.
• If you do not insert the card all the way,
it may be broken.
3
Close the door.
1
Lock the door while sliding it.
2
• If you cannot close the Card/Battery
door completely, remove the card
once, then insert it again.
• We recommend using the cards made
by Panasonic. (Use genuine card only)
SV-AS10_PP.book 14 ページ 2003年7月30日 水曜日 午後9時24分