Panasonic CZ-RWSU2N, Руководство по эксплуатации

Страница: 14 / 224

6. Timer Operation
14
(EN)
• When setting the timer, make sure the current time on the remote controller
is accurate.
• The timer’s clock can only be set when the display of the remote controller
is ON.
• After setting the timer, put the remote controller for in a place where its
signal will reach the receiver of the indoor unit. (When the time set for the
timer is reached, a signal is sent from the remote controller to start or
stop
the unit.)
Using the Timer
1. Press either
/ of the
or , and
while the time is being displayed, if you
press
/ again, a scheduled time can
be set.
The time last set on the timer is displayed.
“--:--” indicates time to change the batteries.
2. Press either / of the
or
and
set the timer to the desired time.
Every time you press
/
, the time changes in
10 minute increments. If you press and hold the
button, the time changes quickly.
3. After setting the timer, if you press , the
time you set changes to a steady display,
indicating settings are complete.
After the timer setting is displayed for three seconds,
the display reverts to the current time.
1, 2 3
00̲OI̲303000.indb 14 00̲OI̲303000.indb 14 2015/02/20 16:23:04 2015/02/20 16:23:04