6
(EN)
Using 1 indoor unit
Using more than 1 indoor unit
R1 R2
1 2
1 2
Indoor unit
RC
(sub)
RC
(main)
RC wiring
R1 R2
1 2
R1 R2
R1 R2
1 2
RC
(main)
RC
(sub)
Indoor unit
Indoor unit
Indoor unit
RC wiring
Wiring as shown below is prohibited.
R1 R2
1 2
1 2
R1 R2
1 2
R1 R2
Indoor unit
RC
(sub)
RC
(main)
RC wiring
R1 R2
1 2
1 2
R1 R2
1 2
R1 R2
Indoor unit
Indoor unit
RC
RC wiring
When setting both the main and sub remote controllers
After installation, set one remote controller to [Main] and the other to [Sub] for [Main/sub] for “Setting”.
When using the remote controllers* in combination, set the CZ-RTC6 unit to [Sub].
*CZ-RTC5B
Note
Remote controllers can be connected to any indoor unit for operation.
Mounting
1
Remove the top case.
1
Insert the screwdriver to the bottom case.
Insert the screwdriver to the claw as show in the figure.
2
Push the screwdriver in.
Push down the screwdriver along with the slope of the
claw until the top case comes off.
Bottom case
Topcase
Claw (2 places)
A
Flat-blade screwdriver
Topcase
Bottom case
Claw
Flat-blade screwdriver
View
A
