8
(EN)
Basic Operations
1
Start operation.
Press
.
(The operation indicator illuminates.)
To change the setting
(P.10)
To turn the energy saving
operation ON/OFF
Press during operation.
(Only for models equipped with the
energy saving function.)
To stop
(The operation indicator turns off .)
2
Select the item to set.
Press ◄
►.
3
Change the setting.
Press ▲▼ → .
(The cursor disappears.)
Energy saving operation
is in process.
Operation indicator
Note
Operation modes that cannot be set are not displayed.
The swing and airfl ow direction on the remote control is not synchronised with the fl ap movement.
The fl ap display diff ers from the actual fl ap angle.
Pressing
after recovery from mains power failure will resume operation with
the contents before mains power failure has occurred.
If no operation is performed for a certain period of time, the backlight turns off to
save electricity. (Press any button for illumination.)
The energy saving operation restricts the maximum current value, resulting in
decreased cooling/heating performance.
(If the current of outdoor units does not reach the peak due to low load operation,
the current value is not restricted.)
For models that cannot change the airfl ow direction, the airfl ow direction is not displayed.
When restricting the set temperature range (P.31)
The fan speed and airfl ow direction in cooling/drying operation can be adjusted with 3
levels if controlling using one remote controller while assigning an indoor unit (e.g. ceiling-
hung type) which has a 3-level adjustment of fan speed and airfl ow direction in cooling /
drying operation as main unit, and assigning a 4-way ceiling cassette type as sub unit.
