12
(EN)
Setting
RC. setting mode (Main/sub, Clock type, Password change)
Detailed settings (Vent output setting, Temp sensor setting, Temp display
setting)
1
Press and hold the 3 buttons for
4 seconds or more simultaneously.
,
,
►
2
Select the item to set.
▲
▼
→
RC. setting mode
3
Set.
(Select the Code no. and Set data.)
▲
▼
→
►
→
(Repeat)
Code no.
Set data
Code no
.
Set data
01
Main/sub
Set this when using 2 remote controllers.
• 0000: Sub
• 0001:
Main (factory
setting)
02
Clock type
Set the type of clock display.
• 0000: 24 hours
• 0001:
12 hours (AM/PM)
36
Display of
operation lock
cancelling method
Set whether to display the operation lock cancelling method on the
lock screen while operation is locked. (For the lock screen, see the
“Part Names” section in the Quick Reference.)
• 0000:
Displayed
(factory setting)
• 0001: Not displayed
2F
Password
change
Set the administrator password.
• 0000 to 9999
• 0000 (factory setting)
Detailed settings
3
Set.
(Select the indoor unit number, Code no. and Set data.)
▲
▼
→
►
→
(Repeat)
Indoor unit
number
Set data
Code no.
Code no.
Set data
31
Vent output
setting
Set this when connecting a commercially sold fan, etc. to the ventilation
fan output “FAN DRIVE:2P (White)” on the indoor control board.
*Dedicated cables (optional) are required.
• 0000: Not connected
• 0001: Connected
32
Temp sensor
setting
Set this when measuring the room temperature with the room
temperature sensor of the remote controller.
• When using the main and sub controllers, the main one is enabled.
• When controlling in group, set this for the main indoor unit number.
(No setting is required for sub indoor units.)
• When using with the remote sensor in combination, set the indoor
unit setting data.
• 0000: Indoor unit
• 0001: RC
33
Temp display
setting
Set the type of temperature display.
• 0000: °C
• 0001: °F
業務用リモコン̲CZ-RTC5据付書̲En.indd 12
業務用リモコン̲CZ-RTC5据付書̲En.indd 12
2015/07/28 16:03:25
2015/07/28 16:03:25
