Panasonic CZ-RTC4A Скачать руководство пользователя страница 23

Страница: 23 / 28

If operation does not start by pressing [Start/Stop] button ...

Check the following before asking for repair.

Blackout?

●

After recovery from blackout, press

[Start/Stop] again.

If operation does not start, turn off the circuit

breaker and consult the dealer of purchase
about the symptom and Model No.

Is the circuit breaker
turned off?

●

Turn it on and press [Start/Stop] again.

If operation does not start, turn off the circuit

breaker and consult the dealer of purchase
about the symptom and Model No.

blinking?

●

After blinking stops, press [Start/Stop]

again.

If operation does not start, turn off the circuit

breaker and consult the dealer of purchase
about the symptom and Model No.

Is displayed?

●

If any of the following alarm indications

appears, stop operation once and restart
approx. 1 minute later.
(Alarm indication, off)
[•E04 •E06 •P10 •P20 •H06]

If the indication does not reappear, use the unit.
If the indication reappears or an alarm indication

other than the above (combination of numbers
and characters such as E, F, H, L and P)
appears, stop operation, turn off the circuit
breaker and consult the dealer of purchase
about alarm indication, Model No. and indoor
unit No.

Cannot stop the

operation.

Or the unit starts to

run automatically

even if [Start/Stop]

(Off) is pressed.

●

Check if the outing function is activated or

not. (

)

●

Check control by central control device.

Troubleshooting

Содержание CZ-RTC4A





























Результаты поиска

Содержание CZ-RTC4A

Отзывы:

Бренды по названию

Популярные бренды

Panasonic CZ-RTC4A, Руководство по эксплуатации

Результаты поиска

Содержание CZ-RTC4A

Отзывы:

Бренды по названию

Популярные бренды