EN-3
EN
11. Upper and lower limit indication of the
outing function
: Indicates the upper limit of the
temperature
: Indicates the lower limit of the
temperature
12. Operation Mode indication
Displays the selected operation mode.
(AUTO
/HEAT
/DRY /COOL
/
FAN
).
13. Temperature indication
Indicates the set temperature.
14. ˚F / ˚C (Temperature unit) indication
15.
(Remote control sensor) indication
Appears when the remote control sensor is
used.
16.
(Centralized control) indication
Appears when operated in centralized control.
If the remote control operation is not permitted
to the remote unit, when the Start/Stop button,
Mode select button or Temperature setting
button is pressed,
fl ashes and rejects the
change.
1.
(Setting) indication
Appears when the timer program is being set.
2.
(Unit) indication
Indicates the unit No. of the indoor unit which
is selected with the Unit select button, or the
unit in which an abnormality occurs.
3.
(Timer No.) indication
Appears when the time program is being set.
4. Timer program indication
: The indoor unit starts operation at the
programmed time.
: The indoor unit stops operation at the
programmed time.
5.
(Today’s day of the week) indication
Indicates today’s day of the week.
6.
(Program schedule) indication
Appears under days that are scheduled for
program operation.
7. Present time indication
Displays the present time on a 24-hour clock.
Also, displays settings in the various setting
modes.
8.
(Timer off) indication
Displayed when the timer has been turned OFF.
9.
(Error) indication
Displayed when a mistake is made during
timer setting.
10.
(Outing) indication (
Outing
function)
Appears when the outing function is set.
Display Section
(Refer to page
II
)
CZ-RTC2̲Main.indb EN-3
CZ-RTC2̲Main.indb EN-3
2011/06/16 15:26:14
2011/06/16 15:26:14
