Panasonic CZ-CLNC1U, Руководство по установке

Страница: 8 / 16

8
3. Assigning Central Control Addresses
• Before assigning central control addresses for the LonWorks
Interface, use the remote controller to make central control
address settings for A/C units.
• Follow only the steps for “Assigning Central Control Addresses”
when a system controller or other central controller is already
provided.
[Setting Central Control Addresses]
(1) Press and hold both the and buttons for 4
seconds or longer.
Check that the “SETTING” display on the remote controller
is fl ashing.
(2) Set the “03” item code by pressing the and
temperature setting buttons.
(3) Set the desired central control address by pressing the
and timer buttons.
(4) Press the button, and check that the “SETTING”
display stops fl ashing and illuminates instead.
(The setting data cannot be changed unless the
button is pressed.)
(5) Press the button, and check that the display on the
remote controller has been cleared.
(2)
(4)
(5)
(3) (1)
For example, in this case
Indoor unit address: 1-8
Central address:
17
remote controller
[Assigning Central Control Addresses]
(1) Turn the power switch (S001) on the LonWorks Interface
power board to OFF.
(2) Turn the setting switch (S006-2) to OFF (so that central
control addresses are set with the DIP switches).
(3) Set the fi rst central control address with the address
switch (S005). When assigning serial numbers, a
consecutive series of numbers is assigned for the central
control addresses.
<Example> If the fi rst central control address is “5,” then
this circuit board assigns central control
addresses “5,” “6,” “7,” and “8.”
(4) Make the enable/disable settings with the indoor unit
enabling switches (S004).
<Example> If central control addresses “6” and “8” do not
exist, enable only “5” and “7.”
(5) Turn the power switch (S001) on the LonWorks Interface
power board to ON.
OFF
1 2 3 4 5 6 7
S006
OFF
1 2 3 4 5 6
S005
OFF
1 2 3 4
S004
“5” is set as the central control
address for indoor unit group 0,
and “7” is set as the central
control address for indoor unit
group 2.
Pana̲CZ-CLNC1U̲Eng.indd 8 Pana̲CZ-CLNC1U̲Eng.indd 8 2011/11/11 12:23:42 2011/11/11 12:23:42