E
N
G
L
I
S
H
16
CY-VMR5800N
21
E
N
G
L
I
S
H
15
CY-VMR5800N
20
Electrical Connections
(continued)
❐
Advanced system configuration
Example combination
≥
Mobile navigation system (CN-DV2000EN)
≥
Color LCD monitor (CY-VM1500EX)
Notes:
≥
Be sure to fully plug in the connector.
≥
Refer to the operating instructions for the connected devices, in addition.
≥
The RGB input cord is applicable only to Panasonic mobile navigation system (CN-DV1800EN,
CN-DV2000EN, etc.).
Troubleshooting
Preliminary Steps
Check and take steps as described in the tables
below.
If You Suspect Something Wrong
Immediately switch power off.
Disconnect the power connector and check that
there is neither smoke nor heat from the unit before
asking for repairs. Never try to repair the unit your-
self because it is dangerous to do so.
Maintenance
Your product is designed and manufactured to
ensure a minimum of maintenance. Use a soft cloth
for routine exterior cleaning. Never use benzine,
thinner or other solvents.
Product Servicing
If the suggestions in the charts do not solve the
problem, we recommend that you take it to your
nearest authorized Panasonic Service Center. The
product should be serviced only by a qualified tech-
nician.
Cautions:
≥
Do not use the unit if it malfunctions or is
something wrong.
≥
Do not use the unit in abnormal condition, for
example, without display, or with smoke or foul
smell, can cause ignition or electric shock.
Immediately stop using it and call the store
where you purchased it.
There are red, blue and
green spots on the
screen.
No picture.
j
Cause/Step
Trouble
This is a characteristic of liquid crystal panels and is not a problem.
(The liquid crystal panel is built with very high precision technology
and has at least 99.99 % effective image pixels. Be aware that on
0.01 % of the panel there may be missing pixels or constantly light
pixels.)
Are cables connected correctly?
Troubleshooting Tips
16
The screen is dark.
The screen black and
white portions are
reversed.
The screen is too white.
[Brightness and black level]
Are the settings properly adjusted?
12, 13
Page
Replace the Fuse
Use fuses of the same specified rating (3 A). Using
different substitutes or fuses with higher ratings, or
connecting the product directly without a fuse, could
cause fire or damage to the unit.
If the replacement fuse fails, contact your nearest
Panasonic Service Center for service.
RGB-OUT
CY-VMR5800N
Mobile navigation system
(CN-DV2000EN)
Power connector
2
RCA cord (optional)
R (Red)
L (White)
Video
(Yellow)
AV INPUT1
AV INPUT2
or
Video (Yellow)
L (White)
R (Red)
For the front monitor of the mobile
navigation system
For the rear monitor of the DVD playback
Color LCD monitor (CY-VM1500EX)
RGB cord (CA-LDVR60, optional)
(6 m)
RGB
Control unit (CY-VM1500EX)
VIDEO
AUDIO
Insert the connector
obliquely.
No sound.
Is the volume on the lowest level?
10
