6
I
NSTALLATION
VCR Connection
Follow this diagram when connecting your television to a VCR only.
Note:
The remote control must be programmed with supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
Viewing a television program
Procedure
1.
Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2.
Tune the television to the television program you want to view.
Viewing a video
Procedure
r
Option A
1.
Select ANT1 in the SET UP menu under Prog Chan.
2.
Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3.
Begin the video.
r
Option B
1.
Select ANT2 in the SET UP menu under Prog Chan.
2.
Tune the television to Channel 3 or 4, depending on your VCR.
3.
Begin the video.
Recording a television program
Procedure
r
Option A (Recording and viewing the same program)
1.
Select ANT2 in the SET UP menu under Prog Chan.
2.
Tune the television to Channel 3 or 4, depending on your VCR.
3.
Using the VCR, tune to the television program you want to record.
4.
Begin recording.
r
Option B (Recording one program while viewing another program)
1.
Select ANT1 in the SET UP menu under Prog Chan.
2.
Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3.
Using the VCR, tune to the television program you want to record.
4.
Begin recording.
5.
Press the TV/VIDEO button on the remote control to switch back to TV mode.
6.
Tune the television to the television program you want to view.
CONNECTIONS ON BACK OF TV
CABLES NOT SUPPLIED
Incoming Cable
L
R
AUDIO OUT
VIDEO OUT
ANT INPUT
OUTPUT
VCR
VIDEO
S-VIDEO
INPUT
1
CENTER CHANNEL
INPUT
PROG OUT
DIGITAL TV INPUT
L
R
TO AUDIO
AMP
INPUT
2
INPUT
3
L
R
AUDIO
VIDEO
L
R
AUDIO
Y
P
R
P
B
1
2
ANT 1
SPLIT OUT
ANT 2
Use either the
S-Video or Video
connection.
0337-1E Prod a.fm Page 6 Wednesday, February 7, 2001 11:03 AM
