10
I
NSTALLATION
VCR Connection
(For models CT-27SX31/U, CT-32SX31/U, and CT-36SX31/U)
Follow this diagram when connecting your television to a VCR only.
Note:
VIDEO 1input is a dual-purpose input. It is primarily intended for connection
with 480i devices such as a DVD player using the Y P
B
P
R
component video
jacks and Audio L & R jacks. However, it can also be connected to
conventional composite video sources such as a VCR, using only the Y/Video
jack and Audio L & R jacks. The on-screen label will display Component or
Video 1 depending on which source is connected.
Note:
The remote control must be programmed with supplied codes to operate the
VCR. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Viewing a television program
Procedure
1.
Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2.
Tune the television to the television program you want to view.
Viewing a video
Procedure
r
Option A
1.
Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2.
Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3.
Begin the video.
r
Option B
1.
Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2.
Tune the television to Channel 3 or 4, depending on your VCR.
3.
Begin the video.
COMPONENT
VIDEO INPUT
INPUT 1
AUDIO
L
P
B
P
R
Y/VIDEO
R
L
VIDEO
INPUT 2
S-VIDEO
R
PROG.
OUT
R
L
TO AUDIO
AMP
ANT 1
ANT 2
SPLIT
OUT
VCR
VIDEO OUT
AUDIO OUT
L
R
ANT OUT
ANT IN
CONNECTIONS ON BACK OF TV (may vary)
CABLES NOT SUPPLIED
Incoming
Cable
Use either the
S- Video or Video
connection.
INPUT 3
S-VIDEO VIDEO L AUDIO R
HPJ
Jack used for 1/8"
headpone plug
TERMINALS ON FRONT OF TV
0372 E.Prod.fm Page 10 Thursday, June 14, 2001 10:36 AM