- 3 -
Your new TV Monitor/Receiver features a solid state
chassis that is designed to give you many years of
enjoyment. It was thoroughly tested and tuned at the
factory for best performance.
Customer Record
The model and serial number of this product may be
found on the back of the unit. You should note the
model and serial number in the space provided and
retain as a permanent record of your purchase. This
will aid in identification in the event of theft or loss.
Product registration is available for U.S. customers at:
www.prodreg.com/panasonic
Model
Number
Serial
Number
Care and Cleaning
Screen (Turn TV Off)
•
Use a mild soap solution or window
cleaner with a soft clean cloth. DO NOT
USE ABRASIVE CLEANERS.
•
Avoid excessive moisture and wipe dry.
Cabinet and Remote Control
•
Use a soft cloth dampened with water or a
mild detergent solution.
Do not use
benzene, thinner, or other petroleum
based cleaners.
•
Wipe dry with a soft clean cloth.
Avoid
excessive moisture.
Specifications are subject to change without notice
or obligation.
C
ONGRATULATIONS
Specifications
Power Source
CT-1388YD, CT-1389VYD (0.9A)
CT-2088YD, CT-2089VYD (1.3A)
CT-2788YD, CT-2789VYD (1.8A)
120V AC,
60Hz
Channel Capability - 181
(CT-1389VYD, CT-2089VYD and
CT-2789VYD only)
VHF-12;
UHF-56;
Cable-113
1 Video Input Jack
(CT-2788YD and CT-2789VYD)
3 Video Input Jacks
(CT-1388YD,CT-1389VYD.
CT-2088YD and CT-2089VYD)
1V
p-p
,
75 Ohm,
BNC Jack
Type
1 (set) Audio Input Jack
(CT-2788YD and CT-2789VYD)
3 Audio Input Jacks
(CT-1388YD, CT-1389VYD,
CT-2088YD and CT-2089VYD)
500mV RMS
47K Ohm
Phono Jack
Type
1 Video Output Jack
(CT-2788YD and CT-2789VYD)
3 Video Output Jacks
(CT-1388YD, CT-1389VYD,
CT-2088YD and CT-2089VYD)
BNC Jack
Type
1 (set) Audio Output Jack
(CT-2788YD and CT-2789VYD)
3 Audio Output Jacks
(CT-1388YD, CT-1389VYD,
CT-2088YD and CT-2089VYD)
Phono Jack
Type
Video Monitor Output Jack
BNC Jack
Type
Audio Monitor Output Jack
Phono Jack
Type
S-Video In/Out Jacks
Y-C
Connector
Earphone Jack
(CT-1388YD and CT-1389VYD)
1/8” mini
plug Type
Television Location
This
unit
is
intended
to
be
used
with
an
entertainment
center.
Consult
your
dealer
for
available options.
Avoid excessive sunlight or bright lights,
including reflections.
Keep away from excessive heat or moisture.
Inadequate ventilation may cause internal
component failure.
Fluorescent
lighting
may
reduce
Remote
Control transmitting range.
Avoid magnetic equipment, including motors,
fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used
between components. For best results:
•
Use 75-ohm coaxial shielded cables.
•
Use
appropriate
input
and
output
connectors that match your component
connectors.
•
Avoid
long
cables
to
minimize
interference.
AC Power Supply Cord
CAUTION: MAKE SURE PLUG
IS
INSERTED
FULLY
INTO
RECEPTACLE.
This product is equipped with
a three-wire ground type plug -
a plug with two blades and a
third pin which is round. This
plug
will
only
fit
into
a
grounding type outlet. This is a safety feature. If you
are unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet. DO
NOT DEFEAT THE SAFETY PURPOSE OF THE
GROUNDING TYPE PLUG.
Batteries
•
Replace batteries in pairs.
•
Do not mix battery types (zinc carbon with
alkaline).
•
Do not recharge, short-circuit, disassemble,
heat, or burn used batteries.
Cable / Antenna
For proper reception, either a cable or antenna
connection are required.
Cable Connection
Connect the cable supplied by your local
cable company.
Note:
A cable converter box may be required for
proper reception. Check with your local
Cable
company
for
compatibility
requirements.
I
NSTALLATION
3 Wire Ground plug
75 Ohms VHF/UHF
on back of TV
Incoming Cable from Cable Company
I
M
P
ORTANT
I
NFORMATIO
N
F
E
A
T
URE
C
HAR
T
C
ONGRAT
U
L
ATIO
N
S
C
ARE
A
N
D
C
LE
ANING
S
P
E
CIF
ICATI
O
NS
I
NS
TAL
L
ATI
O
N
C
ABLE
/
ANTE
NNA
