background image

6

 Safety precautions

CAUTION

Indoor unit and outdoor unit

Do not wash the indoor unit with 

water, benzine, thinner or scouring 

powder to avoid damage or 

corrosion at the unit.
Do not use for preservation of 

precise equipment, food, animals, 

plants, artwork or other objects. This 

may cause quality deterioration, etc.
Do not use any combustible 

equipment in front of the air

fl

 ow 

outlet to avoid 

fi

 re propagation.

Do not expose plants or pet directly 

to air

fl

 ow to avoid injury, etc.

Do not touch the sharp 

aluminium 

fi

 n, sharp parts may 

cause injury.
Do not switch ON the indoor unit 

when waxing the 

fl

 oor. After waxing, 

aerate the room properly before 

operating the unit.
Do not install the unit in oily and 

smoky areas to prevent damage to 

the unit.
Do not dismantle the unit for 

cleaning purpose to avoid injury.
Do not step onto an unstable bench 

when cleaning the unit to avoid 

injury.
Do not place a vase or water 

container on the unit. Water may 

enter the unit and degrade the 

insulation. This may cause an 

electric shock.
Do not open window or door for 

long time during operation, it may 

lead to inef

fi

 cient power usage and 

uncomfortable temperature changes.

Prevent water leakage by ensuring 

drainage pipe is:

 

-Connected properly,

 

-Kept clear of gutters and 

containers, or

 

-Not immersed in water
After a long period of use or use with 

any combustible equipment, aerate 

the room regularly.
After a long period of use, make 

sure the installation rack does not 

deteriorate to prevent the unit from 

falling down.

Remote control

Do not use rechargeable (Ni-Cd) 

batteries. It may damage the remote 

control.
To prevent malfunction or damage of 

the remote control:

• Remove the batteries if the unit 

is not going to be used for a long 

period of time.

• New batteries of the same type 

must be inserted following the 

polarity stated.

Power supply

Do not disconnect the plug by pulling 

the cord to prevent electric shock.

ACXF55-20720_EN.indd   6

ACXF55-20720_EN.indd   6

4/27/2018   12:07:10 PM

4/27/2018   12:07:10 PM

Содержание CS-Z25UFRAW

























Отзывы: