13
English
Information
Federal Communications Commission Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation instructions. Any
changes or modi
fi
cations not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
Industry Canada Notice
This Class B digital apparatus complies with Canadian ICES-003.
Models Number
CS-XE9SKUA / CU-XE9SKUA
CS-XE12SKUA / CU-XE12SKUA
The above listed models have been designed and manufactured to meet ENERGY
STAR
®
criteria for energy ef
fi
ciency when matched with appropriate coil components.
However, proper refrigerant charge and proper air
fl
ow are critical to achieve rated
capacity and ef
fi
ciency. Installation of this product should follow the manufacturer’s
refrigerant charging and air
fl
ow instructions. Failure to con
fi
rm proper charge and
air
fl
ow may reduce energy ef
fi
ciency and shorten equipment life.
T
roubleshooting / Information
Information for Users on Collection and Disposal of Old Equipment and used Batteries
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard
these items, please contact your local authorities or dealer and ask for the
correct method of disposal.
Pb
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case
it complies with the requirement set by the Directive for the chemical involved.
Contact your local hazardous waste disposal hotline.
ACXF55-01820_SS0116-0.indb 13
ACXF55-01820_SS0116-0.indb 13
13/01/2016 9:29:57 AM
13/01/2016 9:29:57 AM
Содержание CS-XE9SKUA
Страница 14: ...Memo...
