Note
,
POWERFUL
POWERFUL
,
FAN SPEED/
QUIET
• Can be selected at the same time.
• Can be activated in all modes.
• Can be cancelled by pressing the
respective button again.
• POWERFUL, QUIET and FAN SPEED
cannot be selected at the same time.
To set the timer
2
1
3
1
Select ON or OFF
timer
Example:
OFF at 22:00
• Each time pressed:
(exit setting)
2
Set the time
3
Confirm
• To cancel ON or OFF timer, press
or
to select respective or
then
press
.
• If timer is cancelled manually or due to
power failure, you can restore the timer
again by pressing
or
to select
respective or
then press
.
• The nearest timer setting will be displayed
and will activate in sequence.
• Timer operation is based on the clock set
in the remote control and repeats daily
once set. For clock setting, please refer to
Quick Guide.
2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset time.
7
See "To learn more..." for details.
How to use
English
• When selected, the unit will circulate the air in High mode for monitoring the temperature.
When the sensor detects the temperature drops below 46 °F / 8 °C the compressor/heat
pump operation begins, when the temperature reaches 50 °F / 10 °C, the compressor stops
and repeat this cycle.
• For Wireless LAN Module operation setup, please refer to Setup Instructions Manual.
To select Room Freeze Protection
To connect network
RFP
ACXF55-27111_FC1219-1.indb 7
ACXF55-27111_FC1219-1.indb 7
11/21/2019 2:56:52 PM
11/21/2019 2:56:52 PM
