English
7
How to use
To adjust airflow direction
(Remote control display)
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the flaps
swings up/down automatically.
• The vertical flap are fixed at the predetermined
position.
• Do not adjust the flap by hand.
To set the timer
To turn ON and OFF the unit at a preset times.
1
2
3
1
Select ON or OFF
timer
Example:
OFF at 22:00
• Each time pressed:
Cancel
2
Set the time
3
Confirm
TIMER
• To cancel ON or OFF timer, press
or
then press
.
• If timer is cancelled manually or due to power
failure, you can restore the timer again by
pressing
or
then press
.
• The nearest timer setting will be displayed and
will activate in sequence.
• When ON Timer is set, the unit may start
earlier (up to 15 minutes) before the actual
set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in
the remote control and repeats daily once set.
For clock setting, please refer to Quick guide.
Auto Restart Control
• If power is resumed after a power failure, the
operation will restart automatically after a period
of time with previous operation mode and airflow
direction.
• This control is not applicable when TIMER is set.
To select fan speed
(Remote control display)
AUTO
FAN
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
Operation conditions
Use this air conditioner under the following
temperature range.
DBT : Dry bulb temperature
WBT : Wet bulb temperature
50
30
• nanoe-G starts automatically when the unit is
turned on with .
• Can be activated even when the unit is turned
off. In this condition, the unit will operate as a fan
with AUTO fan speed and louver swing.
nanoe-G
PURIFIER
nanoe-G
ACXF55-1900̲OL.ai 7 6/1/2018 12:14:34 PM
ACXF55-1900̲OL.ai 7 6/1/2018 12:14:34 PM
