Panasonic CS-QE12MKE, Руководство по обслуживанию

Страница: 33 / 97

33
12.1.5 Automatic Operation
š
This mode can be set using remote control and the operation is decided by remote control setting temperature,
remote control operation mode, indoor intake air temperature and outdoor air temperature.
š
During operation mode judgment, indoor fan motor (with speed of Lo-) and outdoor fan motor are running for 30
seconds to detect the indoor intake and outdoor air temperature. The operation mode is decided based on below
chart.
š
Every 30 minutes, the indoor and outdoor temperature is judged. Based on remote control setting temperature,
the value of T1 will increase up to 10°C, T2 will decrease by 3°C and T3 will decrease up to 8°C.
š
The Auto Operation Mode shifting will take place whenever operation mode changed from Cool/Soft Dry to
Heating or vice versa.
12.1.6 Fan Operation
š
Fan Operation is used to circulate air in a room.
š
During operation, indoor fan run continuously but outdoor fan and compressor stop.
š
Temperature setting is not applicable.
12.2 Indoor Fan Motor Operation
12.2.1 Basic Rotation Speed (rpm)
š
Manual Fan Speed
[Cooling, Dry]
o
Fan motor’s number of rotation is determined according to remote control setting.
Remote control ○ ○ ○ ○ ○
Tab Hi Me+ Me Me- Lo
[Heating]
o
Fan motor’s number of rotation is determined according to remote control setting.
Remote control ○ ○ ○ ○ ○
Tab SHi Me+ Me Me- Lo
š
Auto Fan Speed
[Cooling, Dry]
o
According to room temperature and setting temperature, indoor fan speed is determined automatically.
o
The indoor fan will operate according to pattern below.