4
ENGLISH
NAME OF EACH PART
■
Remote Control
1
Signal Transmitter
2
Operation Display
3
OFF/ON Button
4
Room Temperature Setting Button
5
Operation Mode Selection Button
6
Timer Set Button
7
Fan Speed Selection Button
8
Air Flow Direction Button
9
Reset Point
(Press with fine-tipped object to clear the memory)
●
Remote Control Signal.
• Make sure it is not obstructed.
• Maximum distance : 10 m.
• Signal received sound.
One short beep or one long beep.
●
Notes for Remote Control.
• Do not throw or drop.
• Do not get it wet.
• Certain type of fluorescent lamps may affect
signal reception. Consult your dealer.
1
2
4
3
5
8
7
9
6
●
How to Insert the Batteries
1
Slide down the remote control cover completely
2
Insert the batteries
–
Be sure the direction is correct.
●
About the batteries
• Can be used for approximately one year.
●
Observe the following when replacing the
batteries
• Replace with new batteries of the same type.
• Do not use rechargeable batteries (Ni-Cd).
• Remove the batteries if the unit is not going to
be used for a long period.
PREPARATION BEFORE OPERATION
■
Indoor Unit
1
Connect the power supply cord to an independent
power supply
2
Open the front panel
3
Insert the air filters
4
Close the front panel
2
1
4
3
2
1
F564222 01-09-EN
9/12/03, 5:28 PM
4
