Setting the Vertical Airflow Direction
Press AIR SWING button to select auto airflow direction.
Cool/Dry: The vertical airflow louvers swing up and down to form a natural
breeze.
Manual Airflow Direction
Press
AIR SWING
button to select manual airflow direction.
5 stages can be obtained.
Heat: When the outlet air temperature is low, the vertical
airflow louvers will position a horizontal level and will be at
a downward position as the temperature increases.
Auto Airflow Direction
Ensure that the angles of the vertical airflow direction louvers are
adjusted by using the remote control. If it were manually adjusted,
the proper mechanism of the louvers may be affected. If such a case,
turn off the air conditioner temporarily and then restart the operation.
Heat: When the outlet air temperature is low, the vertical airflow louvers will
position a horizontal level and will be at a downward position as the
temperature increases.
When temperature rises.
When temperature is low.
During Cooling and Soft Dry operations, please avoid
the vertical airflow direction louvers from positioning in a
downward direction for a long period. Otherwise, if
condensation occured near the airflow direction louver
and air outlet vents, it may result in water dripping.
After the air conditioner stopped and restarted
immediately, the compressor will not operate within
3 minutes. (For compressor protection purposes.)
Inverter
To adjust the horizontal airflow direction, manually
move the Horizontal Airflow Direction Louver.
The Horizontal Airflow direction can be manually controlled.
Setting the Horizontal Airflow Direction
5
Notes:
SELECT
SET/CANCEL
ERROR RESET
OFF/ON
TEMP
MODE
FAN SPEED
AIR SWING
TIMER
A
B
RESET
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
A
B
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
A
B
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
A
B
Panasonic
Basic Operation
