Panasonic CS-MZ5SKE, Руководство по обслуживанию

Страница: 53 / 111

53
10.4 Quiet Operation (Cooling Mode/Cooling Area of Dry Mode)

Purpose
o
To provide quiet cooling operation compare to normal operation.

Control condition
o
Quiet operation start condition
 When “POWERFUL/QUIET” button at remote control is pressed twice.
QUIET will be shown on remote control display.
o
Quiet operation stop condition
 When one of the following conditions is satisfied, quiet operation stops:

POWERFUL/QUIET button is pressed again.

Stop by OFF/ON switch.

Timer “off” activates.

ECONAVI button is pressed.

Mild Dry Cooling button is pressed.
 When quiet operation is stopped, operation is shifted to normal operation with previous setting.
 When operation mode is changed, quiet operation is shifted to quiet operation of the new mode.
 During quiet operation, if timer “on” activates, quiet operation maintains.

After off, when on back, quiet operation is not memorised.

Control contents
o
Fan speed is changed to Lo-.
10.5 Quiet Operation (Heating)

Purpose
o
To provide quiet heating operation compare to normal operation.

Control condition
o
Quiet operation start condition
 When “POWERFUL/QUIET” button at remote control is pressed twice.
QUIET will be shown on remote control display.
o
Quiet operation stop condition
 When one of the following conditions is satisfied, quiet operation stops:

POWERFUL/QUIET button is pressed again.

Stop by OFF/ON switch.

Timer “off” activates.

ECONAVI button is pressed.

Mild Dry Cooling button is pressed.
 When quiet operation is stopped, operation is shifted to normal operation with previous setting.
 When operation mode is changed, quiet operation is shifted to quiet operation of the new mode, except
fan mode only.
 During quiet operation, if timer “on” activates, quiet operation maintains.
 After off, when on back, quiet operation is not memorised.

Control contents
o
Fan speed manual
 Fan speed is changed to Lo-.
o
Fan Speed Auto

Fan speed is changed to Lo-.
10.6 Powerful Mode Operation

When the powerful mode is selected, the internal setting temperature will shift lower up to -2°C for Cooling, -1°C
for Soft Dry or higher up to 3.6°C for Heating than remote control setting temperature for 20 minutes to achieve
the setting temperature quickly.