10
Connection network using WPS mode (method 1)
1
Press the WPS button from the router that will
be connected to an air conditioner.
• Check that the Wireless LAN LED is ON.
If the Wireless LAN LED is OFF, select the
WLAN ON/OFF to turn it on, and enable
Wireless LAN connection.
2
• Select Easy setting (WPS) from remote
controller.
12:00,Mon
Function setup
Select
Confirm
Powerful
Quiet
Filter check
WLAN
12:00,Mon
WLAN
Select
Confirm
WLAN ON/OFF
Easy setting (WPS)
Advance setting (AP)
Device registration
12:00,Mon
WLAN ON/OFF
Confirm
Request
(Remote Controller Display)
3
• When the connection of air conditioner to
router is successful, the Wireless LAN LED
changed from blinking to ON.
4
• If the Wireless LAN LED keep blinking, check
the wireless router connection.
*1 The interfaces shown here refers to models with wireless remote controller,
however models with wired remote controller shares the same interfaces and
illustrations. Please refer wired remote controller display selection to perform the
app settings.
*1
