manualshive.com logo in svg

Panasonic CS-E7JKEW, Руководство по обслуживанию

Поделиться
Скачать
Panasonic CS-E7JKEW Скачать руководство пользователя страница 66

66

e. Indicator

• When Patrol operation starts, Patrol Sensor indicator ON.
• When e-ion operation starts based on dirtiness level, e-ion indicator ON.

g. Timer Control

• When ON timer activates when unit stops, previous operation resumes and restored last saved patrol operation status.
• When ON timer activates during any operation, no change and carry on current operation.
• When OFF timer activates during any operation, all operation stops and the latest patrol operation status is saved.

h. Power failure

• During Patrol individual operation, if power failure occurs, after power resumes, Patrol individual operation resumes 

immediately.

• During combination operation, if power failure occurs, after power resumes combination operation resume immediately.

i. Error Detection Control

• The Patrol error detection control starts once the power is supplied to Patrol sensor. However, the error will display when the

Patrol operation is ON.

• Error detection method:

- If the Patrol sensor feedback is 0V or 5V continuous for 6 hours, Patrol sensor error occurs. However, the error will display

only when the Patrol operation is ON.

• Patrol Sensor Control after error occurs

- During any operation mode combines with Patrol operation

• Power supply to Patrol sensor is OFF
• Air conditioner normal mode operation continues with Patrol LED and Timer LED blinking and “H58” is indicated.
• Timer LED will always blinking and the Patrol LED continues blinking if the Patrol operation is ON and stops blinking if the

patrol operation is OFF.

- During Patrol individual mode

• Power supply to Patrol sensor is OFF
• Patrol LED and Timer LED blinking and “H58” is indicated.
• Timer LED will always blinking and the Patrol LED continues blinking if the Patrol operation is ON and stops blinking if the

Patrol operation is OFF.

• Error cancel condition:

- Power supply reset

12.12. e-ion Operation

A. Purpose

This operation provides clean air by producing negative ions to attract dust captured at the positively charged e-ion filters.

f.  Remote Control Receiving Sound

• Normal Operation
• Patrol Mode
• Patrol Mode
• Stop

→

→

→

→

Patrol Mode
Stop
Normal Operation
Patrol

:
:
:
:

Beep
Long Beep
Beep
Beep

Содержание CS-E7JKEW



































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды