AUTO
HEAT
COOL
4
PRODUCT OVERVIEW & OPERATIONS
PRODUCT OVERVIEW & OPERATIONS
Front panel
Receiver
e-ion AIR PURIFYING SYSTEM
Do not touch during operation
e-ion
fi
lters
Active e-ion Power
Module
Active e-ion Generator
Maximum distances: 8m
Air
fl
ow direction louver
• Do not adjust by hand.
Remote control
display
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C.
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode every 30 minutes according to
temperature setting, outdoor and room temperature. During
operation mode selection the power indicator blinks.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks
during this operation.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
Auto OFF/ON button
• Used when remote control is misplaced or
malfunction.
Action
Mode
Press once.
Auto
Press and hold until 1 beep is
heard, then release.
Cooling
Press and hold until 1 beep is
heard, then release.
Press again until 2 beeps, then
release.
Heating
Press the button to turn off.
INDICATOR
PATROL
SENSOR
(Green) (Orange) (Orange) (Orange) (Blue)
(Blue)
