manualshive.com logo in svg

Panasonic CS-E12GKDW, Руководство по обслуживанию

Поделиться
Скачать
Panasonic CS-E12GKDW Скачать руководство пользователя страница 40

40

Troubleshooting Method

• Press “e-ion” button or “OFF/ON” button to stop the operation and check the e-ion Air Purifying system main connector to

PCB.

• After that, press “e-ion” button again to confirm the e-ion indicator not blinking.
• The 24 times counter will be clear after 10 minutes of normal operation or when operation stops.

Error Reset Method

• Press “OFF/ON” button to OFF the operation.
• Press AUTO OFF/ON button at indoor unit to OFF the operation.
• OFF Timer activates.
• Press “e-ion” button during e-ion individual mode.
• Power supply reset.

iii. e-ion breakdown

Judgement Method

• When hi-feedback voltage (at microcontroller) supplied to filter during e-ion stop, due to PCB or filter’s high voltage power

supply damage.

• Operations except e-ion continue. Both Timer indicator and e-ion indicator blink.

Troubleshooting Method

• Press “e-ion” button or “OFF/ON” button to stop the operation.
• Change main circuit board or filter’s high voltage power supply.
• When lo-feedback voltage supplied to e-ion Air Purifying system during e-ion operation, e-ion indicator and Timer indicator

stop blinking.

12.2. Protection Control

12.2.1.

Protection Control For All Operations

12.2.1.1. Time Delay Safety Control

1. The compressor will not start for 3 minutes after stop of the operation.
2. This control is not applicable if the power supply is cut off and on again or after 4-way valve deices condition.

12.2.1.2. 30 Seconds Forced Operation

1. Once compressor starts the operation, it will not stop its operation for 30 seconds.
2. However, it can be stopped with the remote control or the Auto Switch on the indoor unit.

12.2.1.3. Total Running Current Control

1. When the outdoor unit total running current (AC) exceeds X value, the frequency instructed for compressor operation will be

decreased.

2. If the running current does not exceed X value for 5 seconds, the frequency instructed will be increased.
3. However, if total outdoor unit running current exceeds Y value, compressor will be stopped immediately for 3 minutes.

4. The first 30 minutes of cooling operation, (A) will be applied.

Model

E7GK

E9GK

E12GK

Operation Mode

X (A)

Y (A)

X (A)

Y (A)

X (A)

Y (A)

Cooling/Soft Dry (A)

3.95

15.0

4.54

15.0

6.86

15.0

Cooling/Soft Dry (B)

3.6

15.0

4.12

15.0

6.35

15.0

Heating

4.37

15.0

5.57

15.0

8.03

15.0

Содержание CS-E12GKDW








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды