Panasonic CS-C125KE Скачать руководство пользователя страница 25

Страница: 25 / 89

9 Operating Instructions

■

Do not install, remove and reinstall the unit yourself.
Improper installation will cause leakage, electric shock or fire. Please consult an authorized dealer or specialist
for the installation work.

SAFETY PRECAUTIONS

Before operating, please read the following “Safety Precautions” carefully.

To prevent personal injury, injury to others and property damage, the following instructions must be followed.

■

Incorrect operation due to failure to follow instructions will cause harm or damage, the seriousness of which is
classified as follows :

■

The instructions to be followed are classified by the following symbols :

Warning

Caution

This symbol (with a white background) denotes

an action that is PROHIBITED.

Warning

This sign warns of death or serious injury.

■

This room air conditioner must be earthed.

Improper grounding could cause
electric shock.

■

Do not install the unit in a place where there
may be explosive gas leaks.

Gas leaks near the unit could cause
fires.

OFF

These symbols (with a black background)

denote actions that are COMPULSORY.

Caution

This sign warns of damage to property.

●

Installation Precautions

■

Ensure that the drainage piping is connected
properly.

Otherwise, water will leak out.

CS-C75KE CU-C75KE / CS-C95KE CU-C95KE / CS-C125KE CU-C125KE

Содержание CS-C125KE


























































































Результаты поиска

Содержание CS-C125KE

Отзывы:

Бренды по названию

Популярные бренды

Panasonic CS-C125KE, Руководство по обслуживанию

Результаты поиска

Содержание CS-C125KE

Отзывы:

Бренды по названию

Популярные бренды