Panasonic CS-A24BB4P, Руководство по обслуживанию

Страница: 144 / 208

1* If jumper wire J3 on the indoor unit circuit board is disconnected, the
thermostat characteristics during heating become 2K or higher.
NOTE
:
If the remote control display setting temperature (To) is 29°C or higher,
the heating thermostat turns on when the room temperature is 31°C.
2. Thermostat characteristics during dry mode.
During dry mode operation, cooling mode operation is carried out
in accordance with the indoor temperature as shown in the table
below.
* When modes (2) and (3) are active, dry mode operation starts when the cooling thermostat
turns on.
When modes (2) and (3) have been stopped, the 10 min./5 min. times have no relevance.
However, if the indoor temperature is less than or equal to the remote control unit setting
temperature, mode (4) is forcibly activated.
3. Thermostat characteristics during automatic changeover
operation
A. Settings at the start of automatic changeover operation
When operation changes from other modes to automatic
changeover mode, operation starts at the temperature
characteristics given in the table below.
144