Panasonic CQC1401U - AUTO RADIO/CD DECK, Руководство по обслуживанию

Страница: 3 / 42

1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
Caution :
• • • •
Pb free solder has a higher melting point than standard
solder; Typically the melting point is 50 - 70°F (30 -
40°C)
higher. Please use a soldering iron with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
•
• •
•
Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
• • • •
This lead free solder will be used for the products after
serial No. 1,000,001.
2 LASER PRODUCTS
3 FEATUERS
• • • •
Digital servo for reliable playback.
•
• •
•
PLL (Phase Locked Loop) synthesized tuning.
•
• •
•
18-FM, 6-AM presets with preset scan.
•
• •
•
Removable face plate.
•
• •
•
MP3/WMA Playback from CD-R/RW.
•
• •
•
CD Changer Control. (CQ-C1401U)
•
• •
•
The following table describes the differences between
2 models
4 REPLACING THE FUSE
Use fuses of the same specified rating (15amps). Using
different substitutes or fuses with higher ratings, or connecting
the product directly without a fuse, could cause fire or damage
to the stereo unit.
5 MAINTENANCE
Your product is designed and manufactured to ensure a
minimum of maintenance. Use a dry, a soft cloth for routine
exterior cleaning. Never use benzine, thinner or other solvents.
6 NOTES
[RADIO BLOCK]
Do not align the AM/FM package block. When the package
block is necessary, it will be supplied already aligned at the
factory.
[CD DECK BLOCK]
This model has no servo alignment points because
microcomputer controls the servo circuit.
7 DIMENSIONS
3
CQ-C1401U / CQ-C1301U