Panasonic CQ-VD5005L, Руководство по эксплуатации

Страница: 35 / 70

appears when
is selected.
: proceed.
: no memory clear. Cancel
OK
Yes
Really?
34
35
CQ-VD5005U/L
English
Memory Clear
Memory clearance
The state of all of the current memories are returned to
default settings.
Note:
¡
The ID code is not deleted by executing memory clear.
: clears the memory to default settings.
: no memory clear.
The display returns to the previous one.
No
Yes
Input Select
AV1/AV2 input selection
: an external device is connected to AV1.
: skips AV1.
default:
: an external device is connected to AV2.
: TV tuner is connected to AV2.
: skips AV2.
default:
Selection of the terminal that connects to the rear view
camera.
Preparation: Connect the reverse lead. ( a Installation
Instructions)
: connected to the CAMERA IN
: unconnected
default:
Note:
¡ Make sure to select when no rear view camera is
connected.
¡ The image from the rear view camera may be blurred
in the night or a dark place.
Off
Off
Off
On
(Rear view camera set up) Camera
AV2
Skip
TV
AV2
(AV2 input selection)
AV2
AV1
Skip
AV1
(AV1 input selection)
AV1
Other
Other settings
: sets to ON if your car has ACC position.
: sets to OFF if your car has no ACC posi-
tion.
default:
Note:
¡ For an ACC-equipped car, select ON. The following
functions are available.
¡ The power is turned on automatically when inserting
a disc or magazine.
¡ selection disables turning on the power of the
main unit through the remote control.
: activates the security alarm.
( a page 13)
: inactivates the security alarm.
default:
On
Off
On
(Security Alarm)
Security Alarm
Off
On
Off
On
(Setting ACC selection ON and
OFF)
ACC Select
Caution
¡ Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
OFF
ACC
IGN
Caution
¡
Be sure to select off when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.