❏
To Remove the Display Unit
a) Push the right and left clamp plates outwards,
one at a time, and pull the display unit toward
yourself.
b) After removing the right and left clamp plates,
pull the unit with both hands till it comes off.
54
CQ-VA707N
E
N
G
L
I
S
H
51
Installation
(Continued)
Push here to
remove the
clamp plates.
<Mounting the Control Unit>
Mounting Example
Stick Velcro tape
o
on the carpet and
mount the control unit on it.
Connect car radio antenna cord to the
control unit using radio antenna exten-
sion cord
!9
between them.
Notes:
¡
Never mount the control unit in any of the following locations to avoid damage due to overheating:
1. Near the heater port.
2. Places like the dashboard or rear deck, where it may be exposed to direct sunlight.
¡
Do not mount the control unit near the door, where it could be exposed to rain.
Control Unit
o
Velcro Tape
Carpet
!9
Radio Antenna
Extension Cord
Car Radio
Antenna Cord
Rado Antenna Connector
Note:
Some carpet materials may not
be suitable for this mounting method. In
this case, please contact your nearest
Panasonic Service center for service.
