Panasonic CQ-RDP102S, Руководство по обслуживанию

Страница: 10 / 48

Pin No. Port Descriptions I/O Vol.(V)
33 LRCKIN DAC LRCK signal I 2.5
34 LRCK DAC LRCK signal O 2.5
35 HOLD/WDCK Not used - -
36 TX Not used - -
37 D.GND Digital logic Ground - 0
38 C16M Not used - -
39 LIMIT (Connecting to VDD) - 5.0
40 D.VDD Digital logic power supply - 5.0
41 LOCK EFM SYNC detection O 5.0
42 RFCK Not used - -
43 MIRR/WFCK Not used - -
44 PLCK Not used - -
45 D.GND Digital logic Ground - 0
46 C1D1 Not used - -
47 C1D2 Not used - -
48 C2D1 Not used - -
49 C2D2 Not used - -
50 C2D3 Not used - -
51 D.VDD Digital logic power supply - 5.0
52 PACK Not used - -
53 TSO Not used - -
54 TSI (Connecting to ground) - 0
55 /TSCK (Connecting to ground) - 0
56 TSTB (Connecting to ground) - 0
57 D.GND Digital logic Ground - 0
58 TEST0 (Connecting to ground) - 0
59 TEST1 (Connecting to ground) - 0
60 ATEST Not used - 2.1
61 A.GND Analog logic Ground - 0
62 FD Focus drive O 2.6
63 TD Traking drive O 2.5
64 SD Sled drive O 2.5
65 MD Spindle drive O 2.6
66 DAC0 Not used - -
67 DAC1 Not used - -
68 DAC2 Not used - -
69 DAC3 Not used - -
70 A.VDD Analog logic power supply - 5.0
71 EFM EFM signal O 2.7
72 ASY Reference voltage for EFM comp. I 2.5
73 C3T Capacitor terminal for 3T detection - 2.7
74 RFI RF for EFM data generation I 2.5
75 AGCO RF signal output (after gain adjustment) O 2.5
76 AGCI RF-AGC amp input I 2.5
77 RFO RF summing amp output O 2.8
78 EQ2 C/R terminal for RF amp equalizer - 2.6
79 EQ1 C/R terminal for RF amp equalizer - 0.5
80 RF- RF summing amp inverted input I 2.4
81 A.GND Analog logic Ground - 0
82 A Photo detector A input I 2.7
83 C Photo detector C input I 2.5
84 B Photo detector B input I 2.7
85 D Photo detector D input I 2.5
86 F Photo detector F input I 3.0
10