17
CQ-DFX802N
14
E
N
G
L
I
S
H
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.
Caution:
To ensure safety, never attempt to preset stations while you are driving.
Manual Preset
Memory
Manually save a station in
the preset memory.
q
Select a band and frequency (step
w
and
e
on the previous page)
w
Press and hold
for more than 2 sec-
onds until the preset number blinks.
e
Press
or
/ [
{
]
or
[
}
]
to select a preset number.
r
Press and hold
for more than 2 seconds to memorize.
The display blinks once, and a receiving
station is saved in the memory.
Note:
Frequency setting can be performed even after selecting a preset
number.
Entering numbers directly from the remote control
Select a band and frequency (step
w
and
e
on the previous page)
Press and hold one of the preset buttons from
[1]
to
[6]
on the remote con-
trol for more than 2 seconds.
Auto Preset
Memory
Automatically save sta-
tions with good reception
in the preset memory.
¡
The 6 strongest available stations will be automatically saved in the memory
under preset numbers
1
to
6
.
¡
Once set, the preset stations are sequentially scanned for 5 seconds each.
¡
To stop the scanning, press
or
/ [
{
]
or
[
}
]
.
(Pressing one of the buttons from
[1]
to
[6]
on the remote control also can
stop the scanning.)
Note:
Only RDS stations will be saved at default setting (AF ON). To select
non RDS stations too, set AF OFF. (
a
page 17)
Preset Station
Calling
q
Select a band (step
w
on the previous page)
w
Press to
show .
e
Press
or
/ [
{
]
or
[
}
]
to select the preset number for
tuning in the preset station.
Press one of the preset buttons from
[1]
to
[6]
on the remote control.
Note:
New stations overwrite on existing saved stations after following this procedure.
Entering numbers directly from the remote control
Station Preset
q
Select a band (step
w
on the previous
page)
w
Press and hold
[BAND]
for more than
2 seconds.
