57
56
E
N
G
L
I
S
H
CQ-D5501W
56
55
E
N
G
L
I
S
H
CQ-D5501W
Display
The disc is dirty or upside down.
The disc has scratches.
a
Eject the magazine.
¡
Check the disc.
¡
Load the disc again.
To next disc automatically
No operation by some cause.
a
Eject the magazine. If the failure persists, press the reset switch on
the CD changer. If normal operation is not restored, consult your
dealer or the nearest Panasonic Service Center to ask for repairs.
No disc is in the CD Changer (magazine).
a
Insert discs into the changer (magazine).
After 5 seconds
Troubleshooting
(continued)
Possible cause
a
Possible solution
The changer has become disconnected from the unit in the changer mode.
a
Verify the wiring.
Note:
¡
Messages in the action and display sections of the error chart vary with changer. Refer to the operating instructions for
the CD changer for details.
Error Display Messages
(continued)
■
CD Changer
Option
The battery is inserted in the wrong direction. A wrong battery is inserted.
a
Insert a correct battery in the correct direction.
The battery is weak.
a
Replace the battery with new one.
The aiming direction of the remote control unit is wrong.
a
Aim the remote control unit at the sensor of the unit and press buttons.
The sensor is exposed to direct sunlight. (The remote control unit may not be
operable when the sensor is exposed to direct sunlight. In such a case, the
system is not faulty.)
a
Block off sunlight to the sensor.
No response to press-
ing buttons
■
Remote control unit
Problem
Possible cause
a
Possible solution
The disc is still unfinalized.
a
Finalize the disc.
Refer to “Discs that can be Played Back” (
a
Page 8) or “Notes on
Discs” (
a
Page 43) for other cases.
A DVD-R or DVD-RW is
not playable.
■
DVD/VCD (continued)
Problem
Possible cause
a
Possible solution
The disc is upside down.
The player for some reason cannot read the file you are trying to play.
(File recorded in an unsupported file system, compression scheme, data
format, file name extension, damaged data, etc.)
a
Eject the disc. Select a file that the player can read. Check the type
of data recorded on the disc. Create a new disc if necessary.
Display
The disc is dirty.
The disc has scratches.
a
Eject the disc.
Error Display Messages
■
CD/MP3
Possible cause
a
Possible solution
No operation by some cause.
a
Eject the disc. If the disc is not ejected when you press [
u
] (eject),
unplug the power cord and plug it again. In case the unit is still out
of order, consult your dealer.
Note:
¡
Refer to “Discs that can be Played Back”. (
a
Page 8)
