CQ-CB8901U
29
XM T
uner
28
XM Tuner
The optional XM receiver allows you to receive the XM radio service.
CQ-CB8901U
Operation Flow
1
Press
[SRC]
(Source) to select the XM
Satellite Radio mode.
Note:
“LOADING” is displayed when it takes for 2
sec. or more to receive the XM satellite radio.
2
Press
[BAND]
to select a band.
¡
Connect the optional XM receiver (XMD1000).
¡
To connect the XM receiver (XMD1000), it is
required to use an optional extension cord
(XMDPAN100)
that is produced by XM exclu-
sively for Panasonic products.
Notes:
¡
“
RADIO ID” is displayed with channel 0.
¡
“
UPDATING” is displayed during the update of the
identification code.
¡
“
LOADING” is displayed during the acquisition of
audio data or information.
3
Select a channel.
Channel selection
[
]
]
: Preceding channel
[
[
]
: Next channel
Preset channel selection
[
{
]
(
P·SET
: Preset):
Lower preset channel
[
}
]
(
P·SET
: Preset):
Higher preset channel
Note:
Direct selection can be executed with
[1]
to
[6]
buttons on remote control.
Channel Preset
(P·SET: Preset)
Selection by Categor
y
(P·SET: Preset)
Functions Only by
Remote Control Unit
SRC
CQ-CB8901U
SRC
Direct Access
A channel can be directly selected.
Example
: channel number 5
1
Press
[#]
(
NUMBER
).
2
Press
[5]
.
3
Press
[SET]
.
Note:
To suspend direct selection, press
[DISP]
(Display)
.
Up to 6 channels can be preset in XM1 to XM3
respectively.
Preset channels can be simply called up by pressing
[
}
]
(
P·SET
) or
[
{
]
(
P·SET
).
Note:
Direct selection can be executed with
[1]
to
[6]
buttons on remote control.
1
Tune into a channel.
2
Hold down
[
}
]
or
[
{
]
for 2 sec. or more.
3
Select a preset number by pressing
[
}
]
or
[
{
]
.
4
Preset the channel by holding down
[
}
]
or
[
{
]
for 2 sec. or more.
Preset number/channel number blinks once.
Notes:
¡
New channels overwrite existing saved channels.
¡
In step 2, a channel can be stored by holding down
one of the preset buttons
[1]
to
[6]
for 2 sec. or more.
¡
To stop presetting channels, press
[DISP]
(Display)
.
You can toggle the category on and off every time you
hold down
[BAND]
for 2 sec. or more. If the category is
set to on, the unit operates as follows for each button:
Channel selection
[
]
]
(
TUNE
): Preceding channel in current category
[
[
]
(
TUNE
): Next channel in current category
Category selection
[
{
]
(
P·SET
: Preset): Preceding category
[
}
]
(
P·SET
: Preset): Next category
XM T
uner Mode
Display
Artist name/Song title
Band
Preset Number
Channel number/name
indicates the satellite tuner
is ready.
TEXT Setting (XM T
uner Menu Display)
1
Press
[MENU]
to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU)
for 2
sec. or more.
2
Press
[BAND]
(
SET
)
to adjust.
3
Press
[MENU]
to confirm the adjust-
ment.
For using the remote control, hold down
[SEL]
(MENU)
for 2 sec. or more.
TEXT
: Enabled (Default)
: Disabled
CQ-CB8901U
CQ-CB8901U
lights when activated.
SRC
CQ-CB8901U
Indicates the intensity of
the radio wave.
