CQ-C8401W/C7401W
English
11
10
Preparation
CQ-C8401W/C7401W
Note:
Adjust the clock when “ADJUST” appears on the
display.
1
Press
[MENU]
to display the menu
display.
For using the remote control, hold down
[SEL]
(MENU)
for 2 sec. or more.
2
Press
[
]
]
or
[
[
]
to display the
DISPLAY menu.
3
Press
[
{
]
to select “CLOCK ADJ”.
4
Press
[BAND]
(
SET
) to confirm the
display.
5
Adjust the setting value.
[
[
]
: Adjusting minutes
[
]
]
: Adjusting hours
[
}
]
: Forward
[
{
]
: Backward
6
Press
[BAND]
(
SET
) to confirm the
adjustment.
Note:
For cancellation of clock adjustment, press
[DISP]
.
7
Press
[MENU]
.
For using the remote control, hold down
[SEL]
(MENU)
for 2 sec. or more.
When the power is switched on for the first time, a
demonstration message appears on the display. Press
[DISP]
to change to regular mode.
1
Set your car's ignition switch to the ACC
or On position.
The demonstration screen appears.
2
Press
[DISP: DISPLAY]
.
The demonstration screen is cancelled, and no more
appears.
Note:
If you would like to turn on the power and make
the demonstration message appear, hold down
[SRC]
(
PWR: POWER
) for 4 sec. or more.
You may need to set the following depending on the
devices to be connected.
Using Subwoofer
¡
Subwoofer level adjustment (
a
page 30)
¡
Subwoofer low pass filter (
a
page 30)
The following functions are activated when the Security
Function is ON. (
a
page 31)
¡
The security indicator lights up when removing the
face plate.
¡
The alarm sounds and the message appears on the
screen to warn you to remove the face plate at ACC
off.
Security Indicator
SRC
CQ-C8401W
SQ
Preparation
First T
ime Power On
(DEMONSTRATION)
Remote Control Preparation
Security Function Setting
Other Settings
Clock adjustment
(CLOCK ADJ: CLOCK ADJUSTMENT)
Warning
Keep batteries and insulation film out of reach of
infants. If an infant ingests a battery, please seek
immediate medical attention.
Cautions
¡
Remove and dispose of an old battery immediately.
¡
Do not disassemble, heat or short a battery. Do not
throw a battery into a fire or water.
¡
Follow local regulations when disposing of a battery.
¡
Improper use of a battery may cause overheating, an
explosion or ignition, resulting in injury or a fire.
Note:
Battery Information:
Battery Type: Panasonic lithium battery (CR2025)
(Included in the remote control)
Battery Life: Approximately 6 months under normal use
(at room temperature)
Preparation Before Initial Use
Pull the insulation film out
from the backside of
remote control gently.
Battery Replacement
q
w
q
Remove the battery holder
with the remote control unit
placed on a flat surface.
q
Stick your thumbnail into
the groove, and push the
holder in the direction of
the arrow, and at the
same time.
w
Pull it out in the direction
of the arrow using a
tough pointed object.
2
3
w
Put a battery in the case
with (+) side facing up.
e
Put the case back.
Tough pointed object
Back side
Insulation film
