27
26
E
N
G
L
I
S
H
CQ-C3303W
Specifications
Note:
¡
Specifications and design are subject to modification without notice due to improvements.
¡
Some figures and illustrations in this manual may be different from your product.
Power supply
: DC 12 V (11 V – 16 V), test
voltage 14.4 V, negative
ground
Current consumption
: Less than 2.1 A (CD mode,
0.5 W 4-channels)
Maximum power output
: 50 W x 4 (at 1 kHz)
volume control maximum
Power output
: 18 W x 4 CH (1 kHz, 1 %, 4
Ω
)
Tone adjustment range
: Bass:
± 12 dB (at 100 Hz)
Treble: ± 12 dB (at 10 kHz)
Speaker impedance
: 4 – 8
Ω
Pre-amp output voltage
: 2.5 V (CD mode, 1 kHz, 0 dB)
Pre-amp output impedance : 200
Ω
Dimensions (W x H x D)
: 178 x 50 x 160 mm
Weight
: 1.4 k
g
Input impedance
: 10 k
Ω
Allowable external input
: 2.0 V
Connector
: 3.5 mm ø Stereo mini-pin
Front AUX input
General
Frequency range
: 87.50 MHz – 108.00 MHz
Usable sensitivity
: 6 dB/µV (S/N 30 dB)
Frequency response
: 30 Hz – 15 kHz (±3 dB)
Alternate channel selectivity : 75 dB
Stereo separation
: 35 dB (1 kHz)
Image rejection ratio
: 70 dB
IF rejection ratio
: 100 dB
Signal to noise ratio
: 62 dB
Frequency range
: 531 kHz – 1 602 kHz
Usable sensitivity
: 28 dB/µV (S/N 20 dB)
Sampling frequency
: 8 times oversampling
DA converter
: 1 bit DAC system
Pick-up type
: Astigma 3-beam
Light source
: Semiconductor laser
Wave length
: 790 nm
Frequency response
: 20 Hz – 20 kHz (±1 dB)
Signal to noise ratio
: 96 dB
Total harmonic distortion
: 0.01 % (1 kHz)
Wow and flutter
: Below measurable limits
Channel separation
: 75 dB
CD Player
AM Radio
FM Stereo Radio