Panasonic CQ-5109U, Руководство по эксплуатации

Страница: 17 / 36

17
SiriusXM Satellite Radio Control
4
Repeat the steps 2 and 3 to enter a 4-digit
number code.
When a 4-digit number code is correctly entered
and
[BAND]
is finally pressed, the all locked
channels are unlocked and start to be received.
(Once turns ACC ON/OFF, the channels return to
previous locked status)
Notes:
¡
If a wrong number code is entered when selects a
locked channel, “WRONG CODE” is displayed and
returns to Channel 1.
¡
If 10 seconds elapse before determining the entry
of the number code, “TIME OUT” is displayed and
returns to previous channel.
¡
To exit the passcode entry, press
[DISP]
and
returns to previous channel.
¡
To change the parental lock passcode, refer to
page 19 for setting.
Channel preset
Up to 6 channels can be preset in SXM1 to SXM3
respectively.
1
Use manual or seek tuning to tune into a
channel.
2
Press and hold one of the preset buttons
[1] through [6] until the display blinks
once.
Preset Number
blinks once
Note: New channels overwrite existing saved chan-
nel after this procedure.
Preset channel selection
Press the corresponding preset button [1]
through [6] to tune in a preset channel.
Selection by category
Category setting
You can toggle the category selection mode ON and
OFF every time you press and hold
[BAND]
for
more than 2 seconds. If the category is set to ON,
the unit operates as follows for each button:
Notes:
¡
When category is set to ON, the letter “c” is
displayed followed by channel number.
¡
When category selection mode is active, as
indicated by “c”, the preset buttons are disabled.
Turn off category selection mode to re-enable the
preset buttons.
Category selection
[FOLDER
}
]: Next category
[FOLDER
{
]: Preceding category
Channel selection
[TUNE/SEEK
}
]: Next available/subscribed
channel in current cat-
egory
[TUNE/SEEK
{
]: Preceding available/sub-
scribed channel in current
category
Note: The simulate category of “All Channel” is
selectable in category selection.
Display change
Press [DISP] (Display) to change the display
of different metadata information.
Band/
channel number
(Data reading)
(Data reading)
(Data reading)
(Data reading)
(Data reading)
Channel name
(Default)
Artist name
Song title
Information of
contents
Category name
Clock
Note: “– – – –” is displayed when there is no infor-
mation on the selected channel.