36
There may be some problems due to operational errors or mistakes. Please read this
manual again and verify that there really is a problem before calling a service person to
ask for repair services.
Symptom
Check point
●
Check whether the display is turned on.
●
Check whether the mode is changed.
a
Press
●
Check if a fuse has been blown.
a
Consult the dealer where you purchased this unit.
●
Check if the video signal cable is correctly connected.
●
Check if the voltage level of the vehicle battery is low.
a
Recharge the battery or change batteries.
●
Check if you are aiming the remote control at the infrared
receiver.
●
Check if the batteries in the remote control are dead.
●
Check if the batteries are loaded correctly.
●
Check if the infrared sensor is connected correctly.
●
Check if the mode is set to the monitor mode.
a
Select the NAVI mode (
page 10).
●
Check if the vehicle position changed when ACC was set to
OFF.
When, for example,
●
The vehicle was transported by a ferry boat.
●
The vehicle was rotated on a turn table in a parking lot.
●
The vehicle was transported by a tow track or other such
vehicle.
a
Drive the vehicle for a while where you are receiving the
GPS signals.
●
The vehicle position is not indicated correctly if GPS
signals can not be received well.
a
Check whether distance correction has been completed
(
page 14).
●
Check if the speed pulse cable is connected correctly.
No picture
Buttons in the
remote control
do not work
The vehicle
position is not
correct
Note
Troubleshooting
Verification First
As
necessary
35
