Panasonic CF-Y4 - Batt For, Руководство по обслуживанию

Страница: 22 / 98

2.3.7. Installation of touch pad
Touch Pad
Insert FPC
Put the PAD sheet to a green area of PAD.
In that case, do not get on the connector and the chip parts.
The standard of the FPC insertion
is FPC reinforcement board and
PAD sheet edge side.
Pad Sheet
Affixation
Match to this line.
Match the Pad Ring to the convex part (two places).
Match the touch pad to this concave part.
OK
NG
Installation of Pad Ring and Touch Pad The Touch Pad back tape affixation specification
Pad Sheet affixation specification
Pad Ring
Positioning pin
Pad Button
Touch Pad
Note that the touch pad does not get on on
the positioning pin. (Refer to the figure below.)
Touch Pad
Put in the width of the connector.
Match to the
connector edge.
Tape
Connector
Put the Tape to mediate the surface of FPC
and the surface of the Chip.
2-14