Panasonic CF-VEBH21U, Руководство по эксплуатации

Страница: 6 / 40

6
E
Connecting/Disconnecting the Computer
1
Turn off the computer.
Disconnect all the devices and cables and close the terminal cover.
2
Connect the AC adaptor to DC-IN jack of the Cradle.
Connect the AC cord to the AC adap-
tor, and connect to an AC outlet.
To AC outlet
Make sure to turn the computer off for connection/disconnection.
Do not connect or disconnect the Cradle while the computer is powered on or in
the sleep (Windows 7), standby (Windows XP) or hibernation mode.
CAUTION
Connecting
Refer to the “Operating Instructions” accompanying computer for informa-
tion on proper handling of the AC adaptor and AC cord.
CAUTION
Even if the AC adaptor is not connected to the Cradle, power is supplied by
the computer’s battery. This allows you to use the USB ports of the Cradle (For
the output speci
fi cations “Speci fi cations” (page 10)).
However, it is recommended to connect the AC adaptor to the Cradle, in order to
avoid unexpected status that may happen when the battery level becomes very low.
• Connect the AC adaptor in the following cases.
- The total power consumption of the connected devices exceeds 240 mA.
- A device with an input voltage of 4.4 V or higher is connected.
- The power consumption or input voltage of the connected device(s) is
unknown.
The LAN, Serial and External Display ports cannot be used unless the AC
adaptor is connected to the Cradle.
NOTE
CF-VEBH21U(DFQW5524ZA)̲Cradle̲EG6 6 CF-VEBH21U(DFQW5524ZA)̲Cradle̲EG6 6 2011/05/20 13:36:14 2011/05/20 13:36:14